JOBLOT OF 10 +3 (SEE DESCRIPTION BELOW) APC AP8953 Switched Rack Power Distribution Units 2G 32A 230V (21)C13 & (3)C19. 10 of these are ready to be re-purposed, there are a further 3 that need to be reset prior to returning to service. These will be clearly marked. Essentially this is a listing for 10, with the other 3 being thrown in! So for the avoidance of doubt – you will receive 13 of these. Please inspect the images as these form part of the item description. You will note that the 4th from the left in the picture has minor damage to the display pixels in a very small area of the screen. The unit is still functional and you are able to functionally see the screen enough for all normal operations. All you see in the photos (plus a further 3 units which are not shown) is what you will get. No software, extraneous interconnects etc are included – only the units themselves. STRICTLY mainland UK only. 10 x APC AP8953 +3 further units Switched Rack Power Distribution Unit 2G 32A 230V (21)C13 & (3)C19. APC Switched Rack AP8953 PDU 32A. APC Switched Rack PDU 2G, 32A, 230V, (21)C13 & (3)C19. Platform will help IT and facilities managers more effectively manage power capacity and functionality for critical network, server, and data centre equipment. The Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing and outlet use management and solve rack-level power needs while incorporating intelligent features such as real power measurement and environmental monitoring, all in a space efficient, zero-U form factor. AP8000 Series Rack PDUs include active power metering and remote alarming with volts, amps, real power (kW), and energy (kWh) measurements. The AP8953 has twenty one (21) IEC-C13, three (3) C19 outlets and one (1) IEC 309 32A input. User Interface display for local access 2. Environmental monitoring port for external temperature/humidity probe 3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port) 4. CAN In/Out ports for network port sharing 5. 21 x IEC320 C13 & 3 x IEC320 C19 Outlets 6. 3 metre power cord terminates with an IEC309 32A input connector. Locking IEC receptacles and locking power cord compatible. Environmental monitoring port for external temperature/humidity monitoring. Full-featured network management interfaces that provide standards-based management via Web. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Network Port Sharing (Up to four rack PDUs share one IP address in one enclosure). NOTE SOFTWARE NOT INCLUDED. Remote Individual Outlet Control. Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment). NOTE NO SOFTWARE INCLUDED. Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Local Current Monitoring Display. The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. Active current measurements (amps). Active power measurements Including volts, amps, real power (kW), and energy (kWh). User customizable alarms and warnings. Embedded log memory to record/review/report historic metered data. Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only). Integrates with StruxureWare Data Center Expert. An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network. SOFTWARE / CONTROL SYSTEMS NOT INCLUDED. Power distribution strip – rack-mountable. AC 220 – 240 V. 1 x power IEC 60309 32A. Power Output Connectors Details. 3 x power IEC 60320 C19 ¦ 21 x power IEC 60320 C13. Power cable – external – 3.05 m ¦. LCD display, overload protection. EN 61000-3-2, EN55022, VDE, EN 61000-3-3, EN55024, RoHS, REACH. P/N: AR3100, AR3150, SMX3000RMHV2UNC. The item “JOBLOT 10x APC AP8953 Rack Power Distribution Unit 2G 32A 230V 21xC13 3xC19 PDU” is in sale since Thursday, September 20, 2018. This item is in the category “Computers/Tablets & Networking\Power Protection, Distribution\Power Distribution Units”. The seller is “guysstuff23″ and is located in Cheltenham. This item can be shipped to United Kingdom.

• Model: AP8953
• Modified Item: No
• Country/Region of Manufacture: India
• Custom Bundle: Yes
• Outlets: (21)C13 & (3)C19
• MPN: AP8953
• Max. Input Current: 32A
• Brand: APC
• Non-Domestic Product: No
• Voltage Compatibility: 230 V
• Bundle Description: 10x good and working APC PDU’s AP8953 PLUS 3x identical units which need to be reset prior to returning to service