APC AP8981 21xC13 3xC19 ZeroU Switched Rack PDU Power Distribution Unit 230V 16A. In Good Condition, Full Working Order. Tested And Reset To Factory Default. 1 x APC AP8981 21xC13 3xC19 ZeroU Switched Rack PDU Power Distribution Unit 230V 16A. Overview APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Main Input Voltage: 208V, 230V. I nput Connection Type: IEC 309 16A 3P+N+PE, IEC 309 20A 3P+N+E. Number of rack unit: 0U. Mounting preference: No preference. Nominal Input Voltage: 400V 3PH. Max line current: 16 A. Input current limits: 16 A. Network frequency: 50/60 Hz. Number of power socket outlets: (21) IEC 320 C13 IEC 320 C13, (3) IEC 320 C19 IEC 320 C19. Operating Environment: 23 – 113 °F (-5 – 45 °C). Operating Relative Humidity: 5 – 95%. Operating Elevation: 0-10000 feet (0-3000 meters). Storage Temperature: -13 – 149 °F (-25 – 65 °C). Storage Relative Humidity: 5 – 95%. Storage Elevation: 0-50000 feet (0-15000 meters). VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK. SA 301416 – 3.