Schneider Electric APC AP8881 PDU. This is a used unit so has a few minor scratches/scuffs that does not affect performance. Ideal for colocation, large or remote data center operators. Plan capacity & balance loads with +/- 3% metering accuracy (amps, volts, kW, kWh). Enables improved energy efficiency and scope 1 and 3 emissions tracking. Easily monitor and manage through EcoStruxure IT and other platforms. APC Metered Rack PDUs offer resilient power distribution and actively measure, display, and log volts, amps, real power (kW) & energy (kWh). This 3 phase PDU offers LCD display, real-time remote monitoring and user-defined alarms to help prevent circuit overloads that can cause accidental power loss to critical equipment. Historical reporting enables users to meter customer power usage, optimize energy use as well as plan for capacity. This zeroU PDU can operate at up to 60 degrees Celsius and can be accessed, configured, and managed remotely via EcoStruxure IT, Web, SNMP and Command Line Interface. Power is supplied to the PDU via IEC 309 3P+N+PE plug with a 1.8m (16 ft) cord while power comes out at 230 volts through (36) C13 and (6) C19 locking outlets. It integrates with EcoStruxure IT, and daisy-chaining is supported to monitoring up to 4 PDUs from 1 IP address as well as a local USB port for easy local firmware updates. Outlet type and quantity: 36 IEC 60320 C13 and 6 IEC 60320 C19. Product or component type: PDU. Cord length: 1.82 m. Input Voltage: 400 V 3 phases. Output Voltage: 230 V. Net weight: 6.38 kg. Mounting preference: No preference. Input Plug Type: IEC 60309 16 A 3P + N + PE, IEC 60309 20 A 3P + N + PE. Max line current: 16 A. Input current limits: 16 A. Load capacity: 11000 VA. Network frequency: 50/60 Hz.