APC_Smart_UPS_X_1_0kVA_800Watts_1000VA_UPS_Rack_Tower_2U_SMX1000i_01_ssi
smart-ups, , , , ,
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i

APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i
APC Smart-UPS X 1.0kVA 800Watts. 1000VA UPS Rack/Tower 2U SMX1000i. In Full Working Order. New Battery Cells Installed. Front Bezel Missing – does not affect operation. 1 x APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i. Output power capacity – 800Watts / 1.0kVA. Max Configurable Power (Watts) – 800Watts / 1.0kVA. Nominal Output Voltage – 230V. Output Voltage Distortion – Less than 5%. Output Frequency (sync to mains) – 50/60Hz +/- 3 Hz. Topology – Line Interactive. Waveform type – Sine wave. Output Connections – (8) IEC 320 C13 (Battery Backup) (2) IEC Jumpers (Battery Backup). Nominal Input Voltage – 230V. Input frequency – 50/60 Hz +/- 3 Hz (auto sensing). Input Connections – IEC-320 C14. Cord Length – 1.83meters. Input voltage range for main operations – 160 – 286V. Input voltage adjustable range for mains operation – 151 – 302V. Number of Power Cords – 1. Battery type – Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof. Typical recharge time – 3hour(s). Replacement Battery – APCRBC116. Expected Battery Life (years) – 3 – 5. RBC Quantity – 1. DC Overcurrent Protection – 60A. Battery Volt-Amp-Hour Capacity – 299. Extended Run Options – APC-Smart-UPS-X-1000VA-Rack-Tower-LCD-230V. Interface Port(s) – SmartSlot, USB. Control panel – Multi-function LCD status and control console. Audible Alarm – Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm. Emergency Power Off (EPO) – Yes. Available SmartSlotT Interface Quantity – 1. Surge Protection and Filtering. Filtering – Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449. Maximum Height – 89MM, 8.9CM. Maximum Width – 432MM, 43.2CM. Maximum Depth – 490MM, 49.0CM. Rack Height – 2U. Net Weight – 22.86KG. Units per Pallet – 8.0. Operating Temperature – 0 – 45 °C. Operating Relative Humidity – 0 – 95 %. Operating Elevation – 0-3000meters. Storage Temperature – -15 – 45 °C. Storage Relative Humidity – 0 – 95 %. Storage Elevation – 0-15000meters. Audible noise at 1 meter from surface of unit – 40.0dBA. Online thermal dissipation – 82.0BTU/hr. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK. This item is in the category “Computers/Tablets & Networking\Power Protection, Distribution\Power Distribution Units”. The seller is “itinstock” and is located in this country: GB. This item can be shipped worldwide.
  • Model: Smart UPS X
  • Type: UPS
  • MPN: SMX1000i
  • Input Connections: IEC-320 C14
  • Output Power Capacity: 1.0kVA
  • Surge Protect: 600 Joules
  • Brand: APC
  • Voltage Compatibility: 230 V
  • Cable Length: 1.83m

APC Smart-UPS X 1.0kVA 800Watts 1000VA UPS Rack/Tower 2U SMX1000i