APC AP8841 Switched 0U 30A Metered Rack PDU 2G 10′ Cord 42-Outlet C13 & C19. APC AP8841 0U 30A Metered Rack PDU 2G 10′ Cord 42-Outlet C13 & C19. Condition: This PDU is used has been tested, and is in working condition. It was used in a climate controlled, dust free data center. Some units may include some light scratches/scuffs that they acquired during relocation to our warehouse. Features: Metered Rack PDU Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Keeping your eye open for unplanned overloads APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Remote Management Capabilities – Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display – The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only). Alarm Thresholds – Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability. Load indicator LED – Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. Integrates with StruxureWare Data Center Expert – An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network. Flash Upgradeable – Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only). Input: 200V, 208V, 230V. Input Connections: NEMA L6-30P. Cord Length: 10 feet (3.05 meters). Output Connections: 36x C13 & 6x C19. Going green, and recycling is a necessity of the future. Our business specializes in estate, business, office and personal liquidation. We sell just about anything, used, new, antique and vintage. Auctiva gets you noticed! The item “APC AP8841 0U 30A Metered Rack PDU 2G 10′ Cord 42-Outlet C13 & C19″ is in sale since Tuesday, January 02, 2018. This item is in the category “Computers/Tablets & Networking\Power Protection, Distribution\Power Distribution Units”. The seller is “slybrood7″ and is located in Lafayette, New Jersey. This item can be shipped worldwide.
- Brand: APC
- Model: AP8841
- MPN: AP8841
- Outlets: 42
- Voltage Compatibility: 200V
- Max. Input Current: 30A
- Bundle Listing: No