Emerson Liebert 32A 17.2KW Adaptive Modular PDU 1 Phase. 3x C13 2x C19 Rack. Model: MPX Power Strip PDU. In Full Working Order. 3 x MPX BRM 230V AC EUR4 C13 L1N PDU. 2 x MPX BRM 230V AC EUR4 C19 L1-N PDU. 1 x Input Power Module 32A EU 1PH IEC. Heat resistant up to 60° C ensuring reliable operation in the warm aisle. Modular hot-swap-enabled output module, controller card and sensors; can be exchanged or updated during operation. Special switch relay (normally closed); connected servers have an uninterrupted power supply even in the event of failure. Redundant power supply for control electronics. Fixed databus on the busbar. Complete data tapping on the Power Entry Module (PEM) (without any additional external monitoring devices). Proactive alert by additional metering of the neutral conductor and crest factor (assessment of network quality facilitating early detection of power-supply unit failures). Maximum Flexibility and Scalability. All modules configured in line with requirements (patented quick-mount fitting for safe installation). One busbar for different networks and power levels input module can be freely selected. All other components are “hot-swap-enabled” when running operation. Mobile display for reading all MPX data on the rack. Optical slot-space display (easy server slot-space identification at the push of a button). Highest Possible Power Levels in all Areas. Power feed of max. 3 x 63 A; optimal for Blade server applications. Only one IP address for up to 4 rails with 24 modules. Plug and Play for numerous sensors. Extensive monitoring with a metering accuracy of ±1 % right through to output level. Module and sensor autodetect function with operating software. Minimal power loss for MPX systems. Device Type: Bus bar – rack-mountable. Input Wiring: 3-phase / 1-phase. Input Voltage: AC 120/208-240 V. Power Capacity: 17.2 kW. MPX – Input Module. Elementary and Monitored type. The MPX PEM is fixed on the MPX PRC and provides the connection to the power supply. Fixed-connection cable; 3 m long. With IEC60309 plug, 1Ph/N/PE 6h blue, 3Ph/N/PE 6h red. The MPX PEM provides connection to the databus for data communication. Integrated RPC2 communication card enables remote monitoring and maintenance of the MPX modules. Provides the following phase-input data: voltage, current, effective power, consumption and frequency. Power alarm functions for individual phases and their operating status are also supported. Further important features: Three displays inform the user on the current status of each individual input. An acoustic alarm is activated at certain overload conditions. The communication card centralizes the MPXs local and remote administration. Serves as the connection point for versatile support options and devices, such as the display module (RPC BDM), various sensors and connection to other MPX or MPH2 systems, for example. Has RJ-45 ports for all connections (except USB port) and does not require any special cabling. RJ-45 LAN port (10/100 MBit) for local network (LAN) connection via an Ethernet cable. Expansion / administration port for local configuration using a computer / laptop, for creating a link-up of several PDUs (MPX or MPH). Display port for connecting the RPC BDM (display module). External sensor port for connecting optional sensors. Remote management: Onboard Web interface, CLI, SNMPv1,2,3, SSH, Telnet Syslog, compatible with Avocent ACS, UMG & MPU, SiteScan, DSView, Rack Power Manager. Nform & Trellis as well as Nagios or other management software programs. Authentication: local, remote: Active Directory, LDAP, TACACS, Radius, Kerberos. Encryption: MD5, AES, DES. Feed cable: 3 m. MPX BRM Output Module – MPXBRM-EBBC6N1N. Module for power distribution via respective outputs. Module for power distribution via respective outputs with metering function on module level. The MPX BRMs have LED ID indicator which identifies every module with a number. Modules are administered in the software. Provides the following metered readings: voltage, current, power, apparent power, kWh and power factor. Power alarm functions and operating status are supported. Type R Receptacle Managed. Module for power distribution via respective outputs with metering function on module level and output level. Provides the following metered readings: voltage, current, power, apparent power, kWh, frequency, power factor and crest factor. Individual outputs can be switched on and off remotely. The MPX BRM enables the distribution to the individual consumers. Each module taps a color-coded phase. All modules are protected against overload with a 20 A circuit breaker. Modules can be exchanged during operation thereby facilitating user-specific installation without having to shut down the MPX. Up to 3 BRM output modules can be installed on a 1,035 mm PRC busbar; up to 6 BRM output modules can be installed on a 1,880 mm PRC busbar. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by. Purchasers in the EU (excluding UK) who are VAT registered. The item “Emerson Liebert 32A 17.2KW Adaptive Modular PDU 1 Phase 3x C13 2x C19 Rack” is in sale since Saturday, December 14, 2019. This item is in the category “Computers/Tablets & Networking\Power Protection, Distribution\Power Distribution Units”. The seller is “itinstock” and is located in North London. This item can be shipped worldwide.
- Model: MPXPRC-V1880XXX
- Cable Length: 3m
- MPN: MPXPEM-EHABXQ30 MPXBRM-EBBC6N1N MPXBRM-EBBC4O1N
- Brand: Emerson Liebert
- Outlets: 3 x EUR6 C13, 2 x EUR4 C19
- Max. Input Current: 32A
- Voltage Compatibility: 240V
- Type: PDU