APC AP7732 2U ATS Automatic Transfer Switch Rack Mount PDU 208V 30A 2xC20 16xC13. In Full Working Order. 1 x APC AP7732 2U ATS Automatic Transfer Switch Rack Mount PDU 208V 30A 2xC20 16xC13. APC rack Automatic Transfer Switches (rack ATS) provide reliable, redundant power to single-corded equipment. The rack ATS has dual input power cords supplying power to the connected load. If the primary power source becomes unavailable, the rack ATS will seamlessly source power from the secondary source without interrupting critical loads. Networked units have built-in network connectivity, which allows for remote management via web, SNMP, or telnet interfaces. Main Input Voltage: 200 V, 208 V, 230 V. Main Output Voltage: 200 V, 208 V. Number of rack unit: 2U. Cable length: 8 ft (2.44 m). Number of cables: 2. Height: 3.46 in (8.8 cm). Width: 17.01 in (43.2 cm). Depth: 9.29 in (23.6 cm). Net Weight: 14.33 lb(US) (6.5 kg). Mounting Location: Front, Rear. Mounting preference: No preference. Input Frequency: 50/60 Hz. Line Rated Current: 24 A. Max line current: 30 A. Input current limits: 30 A. Maximum Total Current Draw per Phase: 30 A. Number of power socket outlets: 16 IEC 60320 C13, 2 IEC 60320 C19. Protection Type: Without circuit breaker. Conformance: Product Certifications, PSE, TÜV-C, TÜV-NURTL. Standards: EN 55022 Class A, FCC Part 15 class A. Ambient Air Temperature for Operation: 23.113 °F (-5.45 °C). Relative Humidity: 5.95 %. Operating altitude: 0…10000 ft. Ambient Air Temperature for Storage: -13.149 °F (-25.65 °C). Storage Relative Humidity: 5.95 %. Storage altitude: 0.50000 ft (0.00.15240.00 m). VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK.